#include <MdcGeomSvc.h>

Inheritance diagram for MdcGeomSvc:

Public Member Functions
	MdcGeomSvc (const std::string &name, ISvcLocator *svcloc)

	~MdcGeomSvc ()

virtual StatusCode	queryInterface (const InterfaceID &riid, void **ppvUnknown)

virtual StatusCode	initialize ()

virtual StatusCode	finalize ()

void	handle (const Incident &inc)
	this handle function is prepared for special use

const MdcGeoWire *const	Wire (unsigned id)

const MdcGeoWire *const	Wire (unsigned lyrid, unsigned wirid)

const MdcGeoLayer *const	Layer (unsigned id)

const MdcGeoSuper *const	SuperLayer (unsigned id)

const MdcGeoGeneral *const	GeneralLayer (unsigned id)

const MdcGeoMisc *const	Misc (void)

const MdcGeoEnd *const	End (unsigned id)

const int	getWireSize ()

const int	getLayerSize ()

const int	getSuperLayerSize ()

const int	getGeneralLayerSize ()

const int	getSegmentNo ()

void	Dump ()

	MdcGeomSvc (const std::string &name, ISvcLocator *svcloc)

	~MdcGeomSvc ()

virtual StatusCode	queryInterface (const InterfaceID &riid, void **ppvUnknown)

virtual StatusCode	initialize ()

virtual StatusCode	finalize ()

void	handle (const Incident &inc)

const MdcGeoWire *const	Wire (unsigned id)

const MdcGeoWire *const	Wire (unsigned lyrid, unsigned wirid)

const MdcGeoLayer *const	Layer (unsigned id)

const MdcGeoSuper *const	SuperLayer (unsigned id)

const MdcGeoGeneral *const	GeneralLayer (unsigned id)

const MdcGeoMisc *const	Misc (void)

const MdcGeoEnd *const	End (unsigned id)

const int	getWireSize ()

const int	getLayerSize ()

const int	getSuperLayerSize ()

const int	getGeneralLayerSize ()

const int	getSegmentNo ()

void	Dump ()

virtual const MdcGeoWire *const	Wire (unsigned id)=0

virtual const MdcGeoWire *const	Wire (unsigned lyrid, unsigned wirid)=0

virtual const MdcGeoLayer *const	Layer (unsigned id)=0

virtual const MdcGeoSuper *const	SuperLayer (unsigned id)=0

virtual const MdcGeoGeneral *const	GeneralLayer (unsigned id)=0

virtual const int	getWireSize ()=0

virtual const int	getLayerSize ()=0

virtual const int	getSuperLayerSize ()=0

virtual const int	getGeneralLayerSize ()=0

virtual void	Dump ()=0

virtual const MdcGeoWire *const	Wire (unsigned id)=0

virtual const MdcGeoWire *const	Wire (unsigned lyrid, unsigned wirid)=0

virtual const MdcGeoLayer *const	Layer (unsigned id)=0

virtual const MdcGeoSuper *const	SuperLayer (unsigned id)=0

virtual const MdcGeoGeneral *const	GeneralLayer (unsigned id)=0

virtual const int	getWireSize ()=0

virtual const int	getLayerSize ()=0

virtual const int	getSuperLayerSize ()=0

virtual const int	getGeneralLayerSize ()=0

virtual void	Dump ()=0

Static Public Member Functions
static bool	getSagFlag (void)

static bool	getSagFlag (void)

Static Public Member Functions inherited from IMdcGeomSvc
static const InterfaceID &	interfaceID ()

static const InterfaceID &	interfaceID ()

Static Public Attributes
static bool	m_doSag = true

static bool	m_readAlignParDataBase = true

static bool	m_nomcalignment =true

Detailed Description

Definition at line 25 of file InstallArea/include/MdcGeomSvc/MdcGeomSvc/MdcGeomSvc.h.

Constructor & Destructor Documentation

◆ MdcGeomSvc() [1/2]

MdcGeomSvc::MdcGeomSvc	(	const std::string &	name,
		ISvcLocator *	svcloc
	)

Definition at line 30 of file MdcGeomSvc.cxx.

                                                                   : Service(name, svcloc) {
    if(getenv("MDCGEOMSVCROOT")){
        m_alignFilePath = std::string(getenv("MDCGEOMSVCROOT"))+std::string("/share/MdcAlignPar.dat");
        //std::cout<<" the MDC alignment file: "<<m_alignFilePath<<std::endl;
 
        m_wirePosFilePath = std::string(getenv("MDCGEOMSVCROOT"))+std::string("/share/WirePosCalib.dat");
        //std::cout<<" the MDC wire position  file: "<<m_wirePosFilePath<<std::endl;
 
        m_wireTensionFilePath = std::string(getenv("MDCGEOMSVCROOT"))+std::string("/share/mdcWireTension.dat");
        //std::cout<<" the MDC wire tension file: "<<m_wireTensionFilePath<<std::endl;
 
    }
    else {
        std::cout<<"A fatal error, contact wangjk..."<<std::endl;
    }
 
    declareProperty("doSag",      m_doSag = true);
    declareProperty("readAlignParDataBase", m_readAlignParDataBase = true);
    declareProperty("mcnoalignment",m_nomcalignment=true);
    declareProperty("wholeShiftX",m_wholeShiftX = 0.);
    declareProperty("wholeShiftY",m_wholeShiftY = 0.);
    declareProperty("wholeShiftZ",m_wholeShiftZ = 0.);
    declareProperty("wholeRotatX",m_wholeRotatX = 0.);
    declareProperty("wholeRotatY",m_wholeRotatY = 0.);
    declareProperty("wholeRotatZ",m_wholeRotatZ = 0.);
    declareProperty("alignFilePath",m_alignFilePath);
    declareProperty("wirePosFilePath",m_wirePosFilePath);
    declareProperty("wireTensionFilePath",m_wireTensionFilePath);
    
 
}

◆ ~MdcGeomSvc() [1/2]

MdcGeomSvc::~MdcGeomSvc ( )

Definition at line 112 of file MdcGeomSvc.cxx.

                       {
    for(vector<MdcGeoLayer*>::iterator it1 = fLayers.begin(); it1 != fLayers.end(); it1++) delete *it1;
    for(vector<MdcGeoSuper*>::iterator it2 = fSupers.begin(); it2 != fSupers.end(); it2++) delete *it2;
    for(vector<MdcGeoWire*>::iterator it3 = fWires.begin(); it3 != fWires.end(); it3++) delete *it3;
    for(vector<MdcGeoEnd*>::iterator it4 = fEnd.begin(); it4 != fEnd.end(); it4++) delete *it4;  
    fGenerals.clear();
    fWires.clear();
    fLayers.clear();
    fSupers.clear();
    fEnd.clear();  
}

◆ MdcGeomSvc() [2/2]

MdcGeomSvc::MdcGeomSvc	(	const std::string &	name,
		ISvcLocator *	svcloc
	)

◆ ~MdcGeomSvc() [2/2]

MdcGeomSvc::~MdcGeomSvc ( )

Member Function Documentation

◆ Dump() [1/2]

void MdcGeomSvc::Dump ( )

virtual

Implements IMdcGeomSvc.

Definition at line 694 of file MdcGeomSvc.cxx.

694{}

Referenced by main().

◆ Dump() [2/2]

void MdcGeomSvc::Dump ( )

virtual

Implements IMdcGeomSvc.

◆ End() [1/2]

const MdcGeoEnd *const MdcGeomSvc::End ( unsigned id )

Definition at line 813 of file MdcGeomSvc.cxx.

                              {
        if (id < fEnd.size())     
            return  fEnd[id];
 
        return 0;
    }  

Referenced by BesMdcGeoParameter::InitFromSvc().

◆ End() [2/2]

const MdcGeoEnd *const MdcGeomSvc::End ( unsigned id )

◆ finalize() [1/2]

StatusCode MdcGeomSvc::finalize ( )

virtual

Definition at line 106 of file MdcGeomSvc.cxx.

                                  {
    MsgStream log(messageService(), name());
    log << MSG::INFO << name() << ": End of Run" << endreq;
    return StatusCode::SUCCESS;
}

Referenced by main().

◆ finalize() [2/2]

virtual StatusCode MdcGeomSvc::finalize ( )

virtual

◆ GeneralLayer() [1/2]

const MdcGeoGeneral *const MdcGeomSvc::GeneralLayer ( unsigned id )

virtual

Implements IMdcGeomSvc.

Definition at line 800 of file MdcGeomSvc.cxx.

                                       {
        if (id < fGenerals.size()) 
            return & fGenerals[id];
 
        return 0;
    }

Referenced by BesMdcGeoParameter::InitFromSvc().

◆ GeneralLayer() [2/2]

const MdcGeoGeneral *const MdcGeomSvc::GeneralLayer ( unsigned id )

virtual

Implements IMdcGeomSvc.

◆ getGeneralLayerSize() [1/2]

const int MdcGeomSvc::getGeneralLayerSize ( )

virtual

Implements IMdcGeomSvc.

Definition at line 684 of file MdcGeomSvc.cxx.

{
    return fGenerals.size();
}

◆ getGeneralLayerSize() [2/2]

const int MdcGeomSvc::getGeneralLayerSize ( )

virtual

Implements IMdcGeomSvc.

◆ getLayerSize() [1/2]

const int MdcGeomSvc::getLayerSize ( )

virtual

Implements IMdcGeomSvc.

Definition at line 674 of file MdcGeomSvc.cxx.

{
    return fLayers.size();
}

Referenced by MdcDetector::MdcDetector(), and KalFitAlg::set_Mdc().

◆ getLayerSize() [2/2]

const int MdcGeomSvc::getLayerSize ( )

virtual

Implements IMdcGeomSvc.

◆ getSagFlag() [1/2]

bool MdcGeomSvc::getSagFlag ( void )

static

Definition at line 821 of file MdcGeomSvc.cxx.

                                {
 
    return m_doSag;
}  

Referenced by MdcGeoWire::Sag().

◆ getSagFlag() [2/2]

static bool MdcGeomSvc::getSagFlag ( void )

static

◆ getSegmentNo() [1/2]

const int MdcGeomSvc::getSegmentNo ( )

Definition at line 689 of file MdcGeomSvc.cxx.

{
    return fEnd.size();
}   

Referenced by BesMdcGeoParameter::InitFromSvc().

◆ getSegmentNo() [2/2]

const int MdcGeomSvc::getSegmentNo ( )

◆ getSuperLayerSize() [1/2]

const int MdcGeomSvc::getSuperLayerSize ( )

virtual

Implements IMdcGeomSvc.

Definition at line 679 of file MdcGeomSvc.cxx.

{
    return fSupers.size();
}

Referenced by MdcDetector::MdcDetector(), and KalFitAlg::set_Mdc().

◆ getSuperLayerSize() [2/2]

const int MdcGeomSvc::getSuperLayerSize ( )

virtual

Implements IMdcGeomSvc.

◆ getWireSize() [1/2]

const int MdcGeomSvc::getWireSize ( )

virtual

Implements IMdcGeomSvc.

Definition at line 669 of file MdcGeomSvc.cxx.

{
    return fWires.size();
}

Referenced by MdcDetector::MdcDetector(), and KalFitAlg::set_Mdc().

◆ getWireSize() [2/2]

const int MdcGeomSvc::getWireSize ( )

virtual

Implements IMdcGeomSvc.

◆ handle() [1/2]

void MdcGeomSvc::handle ( const Incident & inc )

this handle function is prepared for special use

Definition at line 741 of file MdcGeomSvc.cxx.

                                          {
    MsgStream log( messageService(), name() );
    log << MSG::DEBUG << "handle: " << inc.type() << endreq;
    IDataProviderSvc* m_eventSvc;
    Gaudi::svcLocator()->service("EventDataSvc", m_eventSvc, true);
    SmartDataPtr<Event::EventHeader> eventHeader(m_eventSvc,"/Event/EventHeader");
    if (!eventHeader) { 
    log << MSG::FATAL << "Could not find Event Header" << endreq;
      }
    if (m_updataalign) return;
    if (inc.type() == "NewRun" ){
        log << MSG::DEBUG << "Begin Event" << endreq;
        clean();
        m_updataalign = true;
    if(m_nomcalignment&&m_mindex==0) {  
        int   RunNo=eventHeader->runNumber();
        if(RunNo<0)  m_readAlignParDataBase=false ;
           else   m_readAlignParDataBase=true;
        m_mindex+=1;
    cout<<"m__RunNo="<<RunNo<<"m_mindex="<<m_mindex<<endl;
        }
   //std::cout<<"############"<<m_readAlignParDataBase<<std::endl;
        ReadFilePar();          
    }
}

◆ handle() [2/2]

void MdcGeomSvc::handle ( const Incident & inc )

◆ initialize() [1/2]

StatusCode MdcGeomSvc::initialize ( )

virtual

Definition at line 72 of file MdcGeomSvc.cxx.

                                    {
    MsgStream log(messageService(), name());
    log << MSG::INFO << name() << ": Start of run initialisation" << endreq;
 
    StatusCode sc = Service::initialize();
    if ( sc.isFailure() ) return sc;
    m_mindex=0; 
    m_updataalign = false;
    IIncidentSvc* incsvc;
    sc = service("IncidentSvc", incsvc);
    int priority = 100;
    if( sc.isSuccess() ){
        incsvc -> addListener(this, "NewRun", priority);
    }
 
    //    ReadFilePar(); //  get geometry data from file SimUtil/dat/Mdc.txt
    // Fill();  //  get geometry data from Database
 
    sc = service("CalibDataSvc", m_pCalibDataSvc, true);
 
    if ( !sc.isSuccess() ) {
        log << MSG::ERROR 
            << "Could not get IDataProviderSvc interface of CalibXmlCnvSvc" 
            << endreq;
        return sc;
    } else {
        log << MSG::DEBUG 
            << "Retrieved IDataProviderSvc interface of CalibXmlCnvSvc" 
            << endreq;
    }
     ReadFilePar(); 
    return StatusCode::SUCCESS;
}

Referenced by main().

◆ initialize() [2/2]

virtual StatusCode MdcGeomSvc::initialize ( )

virtual

◆ Layer() [1/2]

const MdcGeoLayer *const MdcGeomSvc::Layer ( unsigned id )

virtual

Implements IMdcGeomSvc.

Definition at line 784 of file MdcGeomSvc.cxx.

                                {
        if (id < fLayers.size())
            return  fLayers[id];
 
        return 0;
    }

Referenced by BesMdcSD::Distance(), KalFitAlg::execute(), BesMdcGeoParameter::InitFromSvc(), MdcDetector::MdcDetector(), MdcTrackUtil::nLayerTrackPassed(), BesMdcSD::ProcessHits(), KalFitAlg::set_Mdc(), and Wire().

◆ Layer() [2/2]

const MdcGeoLayer *const MdcGeomSvc::Layer ( unsigned id )

virtual

Implements IMdcGeomSvc.

◆ Misc() [1/2]

const MdcGeoMisc *const MdcGeomSvc::Misc ( void )

Definition at line 808 of file MdcGeomSvc.cxx.

                    {
    return & fMisc;
}

Referenced by BesMdcGeoParameter::InitFromSvc().

◆ Misc() [2/2]

const MdcGeoMisc *const MdcGeomSvc::Misc ( void )

◆ queryInterface() [1/2]

StatusCode MdcGeomSvc::queryInterface	(	const InterfaceID &	riid,
		void **	ppvUnknown
	)

virtual

Definition at line 62 of file MdcGeomSvc.cxx.

                                                                                   {
 
    if ( IID_IMdcGeomSvc.versionMatch(riid) ) { 
        *ppvInterface = static_cast<IMdcGeomSvc*> (this); 
    } else { 
        return Service::queryInterface(riid, ppvInterface) ; 
    }
    return StatusCode::SUCCESS;
}

◆ queryInterface() [2/2]

virtual StatusCode MdcGeomSvc::queryInterface	(	const InterfaceID &	riid,
		void **	ppvUnknown
	)

virtual

◆ SuperLayer() [1/2]

const MdcGeoSuper *const MdcGeomSvc::SuperLayer ( unsigned id )

virtual

Implements IMdcGeomSvc.

Definition at line 792 of file MdcGeomSvc.cxx.

                                     {
        if (id < fSupers.size())
            return  fSupers[id];
 
        return 0;
    }

◆ SuperLayer() [2/2]

const MdcGeoSuper *const MdcGeomSvc::SuperLayer ( unsigned id )

virtual

Implements IMdcGeomSvc.

◆ Wire() [1/4]

const MdcGeoWire *const MdcGeomSvc::Wire ( unsigned id )

virtual

Implements IMdcGeomSvc.

Definition at line 768 of file MdcGeomSvc.cxx.

                               {
        if (id < fWires.size())
            return  fWires[id];
 
        return 0;
    }

Referenced by BesMdcSD::Distance(), KalFitAlg::execute(), HoughValidUpdate::execute(), MdcHoughFinder::execute(), TrkReco::execute(), KalFitAlg::filter_fwd_anal(), KalFitAlg::filter_fwd_calib(), main(), MdcDetector::MdcDetector(), KalFitAlg::set_Mdc(), KalFitAlg::smoother_anal(), and KalFitAlg::smoother_calib().

◆ Wire() [2/4]

const MdcGeoWire *const MdcGeomSvc::Wire ( unsigned id )

virtual

Implements IMdcGeomSvc.

◆ Wire() [3/4]

const MdcGeoWire *const MdcGeomSvc::Wire	(	unsigned	lyrid,
		unsigned	wirid
	)

virtual

Implements IMdcGeomSvc.

Definition at line 776 of file MdcGeomSvc.cxx.

                                                  {
        if ((lyrid <fLayers.size()) && ((int) wirid < Layer(lyrid)->NCell()))
            return fWires[Layer(lyrid)->Wirst() + wirid];
 
        return 0;
    }

◆ Wire() [4/4]

const MdcGeoWire *const MdcGeomSvc::Wire	(	unsigned	lyrid,
		unsigned	wirid
	)

virtual

Implements IMdcGeomSvc.

Member Data Documentation

◆ m_doSag

bool MdcGeomSvc::m_doSag = true

static

Definition at line 54 of file InstallArea/include/MdcGeomSvc/MdcGeomSvc/MdcGeomSvc.h.

Referenced by getSagFlag(), and MdcGeomSvc().

◆ m_nomcalignment

bool MdcGeomSvc::m_nomcalignment =true

static

Definition at line 56 of file InstallArea/include/MdcGeomSvc/MdcGeomSvc/MdcGeomSvc.h.

Referenced by handle(), and MdcGeomSvc().

◆ m_readAlignParDataBase

bool MdcGeomSvc::m_readAlignParDataBase = true

static

Definition at line 55 of file InstallArea/include/MdcGeomSvc/MdcGeomSvc/MdcGeomSvc.h.

Referenced by handle(), and MdcGeomSvc().

The documentation for this class was generated from the following files:

Public Member Functions

Static Public Member Functions

Static Public Attributes

Detailed Description

Constructor & Destructor Documentation

◆ MdcGeomSvc() [1/2]

◆ ~MdcGeomSvc() [1/2]

◆ MdcGeomSvc() [2/2]

◆ ~MdcGeomSvc() [2/2]

Member Function Documentation

◆ Dump() [1/2]

◆ Dump() [2/2]

◆ End() [1/2]

◆ End() [2/2]

◆ finalize() [1/2]

◆ finalize() [2/2]

◆ GeneralLayer() [1/2]

◆ GeneralLayer() [2/2]

◆ getGeneralLayerSize() [1/2]

◆ getGeneralLayerSize() [2/2]

◆ getLayerSize() [1/2]

◆ getLayerSize() [2/2]

◆ getSagFlag() [1/2]

◆ getSagFlag() [2/2]

◆ getSegmentNo() [1/2]

◆ getSegmentNo() [2/2]

◆ getSuperLayerSize() [1/2]

◆ getSuperLayerSize() [2/2]

◆ getWireSize() [1/2]

◆ getWireSize() [2/2]

◆ handle() [1/2]

◆ handle() [2/2]

◆ initialize() [1/2]

◆ initialize() [2/2]

◆ Layer() [1/2]

◆ Layer() [2/2]

◆ Misc() [1/2]

◆ Misc() [2/2]

◆ queryInterface() [1/2]

◆ queryInterface() [2/2]

◆ SuperLayer() [1/2]

◆ SuperLayer() [2/2]

◆ Wire() [1/4]

◆ Wire() [2/4]

◆ Wire() [3/4]

◆ Wire() [4/4]

Member Data Documentation

◆ m_doSag

◆ m_nomcalignment

◆ m_readAlignParDataBase