G4PropagatorInField.hh

Go to the documentation of this file.

//
// ********************************************************************
// * License and Disclaimer                                           *
// *                                                                  *
// * The  Geant4 software  is  copyright of the Copyright Holders  of *
// * the Geant4 Collaboration.  It is provided  under  the terms  and *
// * conditions of the Geant4 Software License,  included in the file *
// * LICENSE and available at  http://cern.ch/geant4/license .  These *
// * include a list of copyright holders.                             *
// *                                                                  *
// * Neither the authors of this software system, nor their employing *
// * institutes,nor the agencies providing financial support for this *
// * work  make  any representation or  warranty, express or implied, *
// * regarding  this  software system or assume any liability for its *
// * use.  Please see the license in the file  LICENSE  and URL above *
// * for the full disclaimer and the limitation of liability.         *
// *                                                                  *
// * This  code  implementation is the result of  the  scientific and *
// * technical work of the GEANT4 collaboration.                      *
// * By using,  copying,  modifying or  distributing the software (or *
// * any work based  on the software)  you  agree  to acknowledge its *
// * use  in  resulting  scientific  publications,  and indicate your *
// * acceptance of all terms of the Geant4 Software license.          *
// ********************************************************************
//
// Class G4PropagatorInField 
//
// class description:
// 
// This class performs the navigation/propagation of a particle/track 
// in a magnetic field. The field is in general non-uniform.
// For the calculation of the path, it relies on the class G4ChordFinder.
 
// History:
// -------
// 25.10.96 John Apostolakis,  design and implementation 
// 25.03.97 John Apostolakis,  adaptation for G4Transportation and cleanup
//  8.11.02 John Apostolakis,  changes to enable use of safety in intersecting
// ---------------------------------------------------------------------------
#ifndef G4PropagatorInField_hh 
#define G4PropagatorInField_hh  1
 
#include "G4Types.hh"
 
#include <vector>
 
#include "G4FieldTrack.hh"
#include "G4FieldManager.hh"
#include "G4VIntersectionLocator.hh"
 
class G4ChordFinder; 
 
class G4Navigator;
class G4VPhysicalVolume;
class G4VCurvedTrajectoryFilter;
 
class G4PropagatorInField
{
 
 public:  // with description
 
   G4PropagatorInField( G4Navigator* theNavigator, 
                        G4FieldManager* detectorFieldMgr,
                        G4VIntersectionLocator* vLocator = nullptr );
  ~G4PropagatorInField();
 
   G4double ComputeStep( G4FieldTrack& pFieldTrack,
                         G4double pCurrentProposedStepLength,
                         G4double& pNewSafety, 
                         G4VPhysicalVolume* pPhysVol = nullptr,
                         G4bool canRelaxDeltaChord = false);
     // Compute the next geometric Step
 
   inline G4ThreeVector EndPosition() const;       
   inline G4ThreeVector EndMomentumDir() const;
   inline G4bool        IsParticleLooping() const;
     // Return the state after the Step
 
   inline G4double GetEpsilonStep() const;
     // Relative accuracy for current Step (Calc.)
   inline void     SetEpsilonStep(G4double newEps);
     // The ratio DeltaOneStep()/h_current_step
 
   G4FieldManager* FindAndSetFieldManager(G4VPhysicalVolume* pCurrentPhysVol);
     // Set (and return) the correct field manager (global or local), 
     // if it exists.
     // Should be called before ComputeStep is called;
     // Currently, ComputeStep will call it, if it has not been called.
 
   inline G4ChordFinder* GetChordFinder();
 
          G4int SetVerboseLevel( G4int verbose );
   inline G4int GetVerboseLevel() const;
   inline G4int Verbose() const;
   inline void CheckMode(G4bool mode);
 
   inline void   SetVerboseTrace( G4bool enable );
   inline G4bool GetVerboseTrace();
   // Tracing key parts of Compute Step
   
   inline G4int GetMaxLoopCount() const;
   inline void  SetMaxLoopCount( G4int new_max );
     // A maximum for the number of substeps that a particle can take.
     //   Above this number it is signaled as 'looping'.
 
   void printStatus( const G4FieldTrack&      startFT,
                     const G4FieldTrack&      currentFT, 
                           G4double           requestStep, 
                           G4double           safety,
                           G4int              step, 
                           G4VPhysicalVolume* startVolume);
     // Print Method - useful mostly for debugging.
 
   inline G4FieldTrack GetEndState() const;
 
   inline G4double GetMinimumEpsilonStep() const; // Min for relative accuracy
   inline void     SetMinimumEpsilonStep( G4double newEpsMin ); // of any step
   inline G4double GetMaximumEpsilonStep() const;
   inline void     SetMaximumEpsilonStep( G4double newEpsMax );
     // The 4 above methods are now obsolescent but *for now* will work 
     // They are being replaced by same-name methods in G4FieldManager,
     // allowing the specialisation in different volumes. 
     // Their new behaviour is to change the values for the global field
     // manager
 
   inline void     SetLargestAcceptableStep( G4double newBigDist );
   inline G4double GetLargestAcceptableStep();
 
   void SetTrajectoryFilter(G4VCurvedTrajectoryFilter* filter);
     // Set the filter that examines & stores 'intermediate' 
     // curved trajectory points.  Currently only position is stored.
 
   std::vector<G4ThreeVector>* GimmeTrajectoryVectorAndForgetIt() const;
     // Access the points which have passed by the filter.
     // Responsibility for deleting the points lies with the client.
     // This method MUST BE called exactly ONCE per step. 
 
   void ClearPropagatorState();
     // Clear all the State of this class and its current associates
     // --> the current field manager & chord finder will also be called
 
   inline void SetDetectorFieldManager( G4FieldManager* newGlobalFieldManager );
     // Update this (dangerous) state -- for the time being
  
   inline void   SetUseSafetyForOptimization( G4bool );
   inline G4bool GetUseSafetyForOptimization();
     // Toggle & view parameter for using safety to discard 
     // unneccesary calls to navigator (thus 'optimising' performance)
   inline G4bool IntersectChord( const G4ThreeVector& StartPointA,
                                 const G4ThreeVector& EndPointB,
                                       G4double&      NewSafety,
                                       G4double&      LinearStepLength,
                                       G4ThreeVector& IntersectionPoint);
     // Intersect the chord from StartPointA to EndPointB
     // and return whether an intersection occurred
     // NOTE: Safety is changed!
 
   inline G4bool IsFirstStepInVolume();
   inline G4bool IsLastStepInVolume();
   inline void PrepareNewTrack();
      
   inline G4VIntersectionLocator* GetIntersectionLocator();
   inline void SetIntersectionLocator(G4VIntersectionLocator* pLocator );
     // Change or get the object which calculates the exact 
     // intersection point with the next boundary
 
   inline G4int GetIterationsToIncreaseChordDistance() const;
   inline void  SetIterationsToIncreaseChordDistance(G4int numIters);
     // Control the parameter which enables the temporary 'relaxation'
     //   which ensures that chord segments are short enough so that
     //   their sagitta is small than delta-chord parameter.
     // The Set method increases the value of delta-chord temporarily,
     //   doubling it once the number of iterations substeps reach
     //   value of 'IncreaseChordDistanceThreshold'.  It is also doubled
     //   again every time the iteration count reaches a multiple of this
     //   value.
     // Note: delta-chord is reset to its original value at the end of
     //   each call to ComputeStep.
 
 public:  // without description
 
   inline G4double GetDeltaIntersection() const;
   inline G4double GetDeltaOneStep() const;
 
   inline G4FieldManager* GetCurrentFieldManager();
   inline G4EquationOfMotion* GetCurrentEquationOfMotion();
      // Auxiliary methods - their results can/will change during propagation
 
   inline void SetNavigatorForPropagating(G4Navigator* SimpleOrMultiNavigator); 
   inline G4Navigator* GetNavigatorForPropagating();
 
   inline void SetThresholdNoZeroStep( G4int noAct,
                                       G4int noHarsh,
                                       G4int noAbandon );
   inline G4int GetThresholdNoZeroSteps( G4int i ); 
 
   inline G4double GetZeroStepThreshold(); 
   inline void     SetZeroStepThreshold( G4double newLength ); 
   
   void RefreshIntersectionLocator(); 
     // Update the Locator with parameters from this class
     // and from current field manager
 
 protected:  // without description
 
   void PrintStepLengthDiagnostic( G4double      currentProposedStepLength,
                                   G4double      decreaseFactor,
                                   G4double      stepTrial,
                             const G4FieldTrack& aFieldTrack);
 
   void ReportLoopingParticle( G4int count,  G4double StepTaken,
                               G4double stepRequest, const char* methodName,
                               G4ThreeVector      momentumVec,
                               G4VPhysicalVolume* physVol);
   void ReportStuckParticle(G4int noZeroSteps, G4double proposedStep,
                            G4double lastTriedStep, G4VPhysicalVolume* physVol);
 
 private:
 
   // ----------------------------------------------------------------------
   //  DATA Members
   // ----------------------------------------------------------------------
 
   //  ==================================================================
   //  INVARIANTS - Must not change during tracking
 
   //  ** PARAMETERS -----------
   G4int fMax_loop_count = 1000;
     // Limit for the number of sub-steps taken in one call to ComputeStep
   G4int fIncreaseChordDistanceThreshold = 100;
   G4bool fUseSafetyForOptimisation = true;
     // (false) is less sensitive to incorrect safety
 
   //  Thresholds for identifying "abnormal" cases - which cause looping
   //
   G4int fActionThreshold_NoZeroSteps = 2;        // Threshold # - above it act
   G4int fSevereActionThreshold_NoZeroSteps = 10; // Threshold # to act harshly
   G4int fAbandonThreshold_NoZeroSteps = 50;      // Threshold # to abandon
   G4double fZeroStepThreshold = 0.0; 
     // Threshold *length* for counting of tiny or 'zero' steps 
 
   G4double fLargestAcceptableStep;
     // Maximum size of a step - for optimization (and to avoid problems)
   //  ** End of PARAMETERS -----
 
   G4double kCarTolerance;
       // Geometrical tolerance defining surface thickness
 
   G4bool fAllocatedLocator;                    //  Book-keeping
 
   //  --------------------------------------------------------
   //  ** Dependent Objects - to which work is delegated 
 
   G4FieldManager* fDetectorFieldMgr; 
       // The  Field Manager of the whole Detector.  (default)
 
   G4VIntersectionLocator* fIntersectionLocator;
     // Refines candidate intersection
 
   G4VCurvedTrajectoryFilter* fpTrajectoryFilter = nullptr;
     // The filter encapsulates the algorithm which selects which
     // intermediate points should be stored in a trajectory. 
     // When it is NULL, no intermediate points will be stored.
     // Else PIF::ComputeStep must submit (all) intermediate
     // points it calculates, to this filter.  (jacek 04/11/2002)
 
   G4Navigator* fNavigator;
     // Set externally - only by tracking / run manager
   //
   //  ** End of Dependent Objects ----------------------------
 
   //  End of INVARIANTS 
   //  ==================================================================
 
   //  STATE information
   //  -----------------
   G4FieldManager* fCurrentFieldMgr;
     // The  Field Manager of the current volume (may be the global)
   G4bool fSetFieldMgr = false;  // Has it been set for the current step?
 
   // Parameters of current step
   G4double fEpsilonStep;            // Relative accuracy of current Step
   G4FieldTrack End_PointAndTangent; // End point storage
   G4bool fParticleIsLooping = false;
   G4int fNoZeroStep = 0;            // Count of zero Steps
 
   // State used for Optimisation
   G4double fFull_CurveLen_of_LastAttempt = -1; 
   G4double fLast_ProposedStepLength = -1; 
     // Previous step information -- for use in adjust step size
   G4ThreeVector fPreviousSftOrigin;
   G4double fPreviousSafety = 0.0; 
     // Last safety origin & value: for optimisation
 
   G4int fVerboseLevel = 0;
   G4bool fVerbTracePiF = false;
   G4bool fCheck = false;
     // For debugging purposes
 
   G4bool fFirstStepInVolume = true; 
   G4bool fLastStepInVolume = true; 
   G4bool fNewTrack = true;
};
 
// Inline methods
//
#include "G4PropagatorInField.icc"
 
#endif