G4VCrossSectionHandler.cc

Go to the documentation of this file.

//
// ********************************************************************
// * License and Disclaimer                                           *
// *                                                                  *
// * The  Geant4 software  is  copyright of the Copyright Holders  of *
// * the Geant4 Collaboration.  It is provided  under  the terms  and *
// * conditions of the Geant4 Software License,  included in the file *
// * LICENSE and available at  http://cern.ch/geant4/license .  These *
// * include a list of copyright holders.                             *
// *                                                                  *
// * Neither the authors of this software system, nor their employing *
// * institutes,nor the agencies providing financial support for this *
// * work  make  any representation or  warranty, express or implied, *
// * regarding  this  software system or assume any liability for its *
// * use.  Please see the license in the file  LICENSE  and URL above *
// * for the full disclaimer and the limitation of liability.         *
// *                                                                  *
// * This  code  implementation is the result of  the  scientific and *
// * technical work of the GEANT4 collaboration.                      *
// * By using,  copying,  modifying or  distributing the software (or *
// * any work based  on the software)  you  agree  to acknowledge its *
// * use  in  resulting  scientific  publications,  and indicate your *
// * acceptance of all terms of the Geant4 Software license.          *
// ********************************************************************
//
//
// $Id$
//
// Author: Maria Grazia Pia (Maria.Grazia.Pia@cern.ch)
//
// History:
// -----------
// 1  Aug 2001   MGP        Created
// 09 Oct 2001   VI         Add FindValue with 3 parameters 
//                          + NumberOfComponents
// 19 Jul 2002   VI         Create composite data set for material
// 21 Jan 2003   VI         Cut per region
//
// 15 Jul 2009   Nicolas A. Karakatsanis
//
//                           - LoadNonLogData method was created to load only the non-logarithmic data from G4EMLOW
//                             dataset. It is essentially performing the data loading operations as in the past.
//
//                           - LoadData method was revised in order to calculate the logarithmic values of the data
//                             It retrieves the data values from the G4EMLOW data files but, then, calculates the
//                             respective log values and loads them to seperate data structures.
//                             The EM data sets, initialized this way, contain both non-log and log values.
//                             These initialized data sets can enhance the computing performance of data interpolation
//                             operations
//
//                           - BuildMeanFreePathForMaterials method was also revised in order to calculate the 
//                             logarithmic values of the loaded data. 
//                             It generates the data values and, then, calculates the respective log values which 
//                             later load to seperate data structures.
//                             The EM data sets, initialized this way, contain both non-log and log values.
//                             These initialized data sets can enhance the computing performance of data interpolation
//                             operations
//                             
//                           - LoadShellData method was revised in order to eliminate the presence of a potential
//                             memory leak originally identified by Riccardo Capra.
//                             Riccardo Capra Original Comment
//                             Riccardo Capra <capra@ge.infn.it>: PLEASE CHECK THE FOLLOWING PIECE OF CODE
//                             "energies" AND "data" G4DataVector ARE ALLOCATED, FILLED IN AND NEVER USED OR
//                             DELETED. WHATSMORE LOADING FILE OPERATIONS WERE DONE BY G4ShellEMDataSet
//                             EVEN BEFORE THE CHANGES I DID ON THIS FILE. SO THE FOLLOWING CODE IN MY
//                             OPINION SHOULD BE USELESS AND SHOULD PRODUCE A MEMORY LEAK.
//
//
// -------------------------------------------------------------------
 
#include "G4VCrossSectionHandler.hh"
#include "G4VDataSetAlgorithm.hh"
#include "G4LogLogInterpolation.hh"
#include "G4VEMDataSet.hh"
#include "G4EMDataSet.hh"
#include "G4CompositeEMDataSet.hh"
#include "G4ShellEMDataSet.hh"
#include "G4ProductionCutsTable.hh"
#include "G4Material.hh"
#include "G4Element.hh"
#include "Randomize.hh"
#include <map>
#include <vector>
#include <fstream>
#include <sstream>
 
 
G4VCrossSectionHandler::G4VCrossSectionHandler()
{
  crossSections = 0;
  interpolation = 0;
  Initialise();
  ActiveElements();
}
 
 
G4VCrossSectionHandler::G4VCrossSectionHandler(G4VDataSetAlgorithm* algorithm,
                           G4double minE,
                           G4double maxE,
                           G4int bins,
                           G4double unitE,
                           G4double unitData,
                           G4int minZ, 
                           G4int maxZ)
  : interpolation(algorithm), eMin(minE), eMax(maxE), nBins(bins),
    unit1(unitE), unit2(unitData), zMin(minZ), zMax(maxZ)
{
  crossSections = 0;
  ActiveElements();
}
 
G4VCrossSectionHandler::~G4VCrossSectionHandler()
{
  delete interpolation;
  interpolation = 0;
  std::map<G4int,G4VEMDataSet*,std::less<G4int> >::iterator pos;
 
  for (pos = dataMap.begin(); pos != dataMap.end(); ++pos)
    {
      // The following is a workaround for STL ObjectSpace implementation, 
      // which does not support the standard and does not accept 
      // the syntax pos->second
      // G4VEMDataSet* dataSet = pos->second;
      G4VEMDataSet* dataSet = (*pos).second;
      delete dataSet;
    }
 
  if (crossSections != 0)
    {
      size_t n = crossSections->size();
      for (size_t i=0; i<n; i++)
    {
      delete (*crossSections)[i];
    }
      delete crossSections;
      crossSections = 0;
    }
}
 
void G4VCrossSectionHandler::Initialise(G4VDataSetAlgorithm* algorithm,
                    G4double minE, G4double maxE, 
                    G4int numberOfBins,
                    G4double unitE, G4double unitData,
                    G4int minZ, G4int maxZ)
{
  if (algorithm != 0) 
    {
      delete interpolation;
      interpolation = algorithm;
    }
  else
    {
      delete interpolation;
      interpolation = CreateInterpolation();
    }
 
  eMin = minE;
  eMax = maxE;
  nBins = numberOfBins;
  unit1 = unitE;
  unit2 = unitData;
  zMin = minZ;
  zMax = maxZ;
}
 
void G4VCrossSectionHandler::PrintData() const
{
  std::map<G4int,G4VEMDataSet*,std::less<G4int> >::const_iterator pos;
 
  for (pos = dataMap.begin(); pos != dataMap.end(); pos++)
    {
      // The following is a workaround for STL ObjectSpace implementation, 
      // which does not support the standard and does not accept 
      // the syntax pos->first or pos->second
      // G4int z = pos->first;
      // G4VEMDataSet* dataSet = pos->second;
      G4int z = (*pos).first;
      G4VEMDataSet* dataSet = (*pos).second;     
      G4cout << "---- Data set for Z = "
         << z
         << G4endl;
      dataSet->PrintData();
      G4cout << "--------------------------------------------------" << G4endl;
    }
}
 
void G4VCrossSectionHandler::LoadData(const G4String& fileName)
{
  size_t nZ = activeZ.size();
  for (size_t i=0; i<nZ; i++)
    {
      G4int Z = (G4int) activeZ[i];
 
      // Build the complete string identifying the file with the data set
      
      char* path = getenv("G4LEDATA");
      if (!path)
    { 
          G4Exception("G4VCrossSectionHandler::LoadData",
            "em0006",FatalException,"G4LEDATA environment variable not set");
      return;
    }
      
      std::ostringstream ost;
      ost << path << '/' << fileName << Z << ".dat";
      std::ifstream file(ost.str().c_str());
      std::filebuf* lsdp = file.rdbuf();
       
      if (! (lsdp->is_open()) )
    {
      G4String excep = "data file: " + ost.str() + " not found";
          G4Exception("G4VCrossSectionHandler::LoadData",
            "em0003",FatalException,excep);
    }
      G4double a = 0;
      G4int k = 0;
      G4int nColumns = 2;
 
      G4DataVector* orig_reg_energies = new G4DataVector;
      G4DataVector* orig_reg_data = new G4DataVector;
      G4DataVector* log_reg_energies = new G4DataVector;
      G4DataVector* log_reg_data = new G4DataVector;
 
      do
    {
      file >> a;
 
          if (a==0.) a=1e-300;
 
      // The file is organized into four columns:
      // 1st column contains the values of energy
      // 2nd column contains the corresponding data value
      // The file terminates with the pattern: -1   -1
      //                                       -2   -2
          //
      if (a != -1 && a != -2)
        {
          if (k%nColumns == 0)
                {
         orig_reg_energies->push_back(a*unit1);
                 log_reg_energies->push_back(std::log10(a)+std::log10(unit1));
                }
          else if (k%nColumns == 1)
                {
         orig_reg_data->push_back(a*unit2);
                 log_reg_data->push_back(std::log10(a)+std::log10(unit2));
                }
              k++;
        }
    } 
      while (a != -2); // End of File
      
      file.close();
      G4VDataSetAlgorithm* algo = interpolation->Clone();
 
      G4VEMDataSet* dataSet = new G4EMDataSet(Z,orig_reg_energies,orig_reg_data,log_reg_energies,log_reg_data,algo);
 
      dataMap[Z] = dataSet;
 
    }
}
 
 
void G4VCrossSectionHandler::LoadNonLogData(const G4String& fileName)
{
  size_t nZ = activeZ.size();
  for (size_t i=0; i<nZ; i++)
    {
      G4int Z = (G4int) activeZ[i];
 
      // Build the complete string identifying the file with the data set
      
      char* path = getenv("G4LEDATA");
      if (!path)
    { 
          G4Exception("G4VCrossSectionHandler::LoadNonLogData",
            "em0006",FatalException,"G4LEDATA environment variable not set");
      return;
    }
      
      std::ostringstream ost;
      ost << path << '/' << fileName << Z << ".dat";
      std::ifstream file(ost.str().c_str());
      std::filebuf* lsdp = file.rdbuf();
       
      if (! (lsdp->is_open()) )
    {
      G4String excep = "data file: " + ost.str() + " not found";
          G4Exception("G4VCrossSectionHandler::LoadNonLogData",
            "em0003",FatalException,excep);
    }
      G4double a = 0;
      G4int k = 0;
      G4int nColumns = 2;
 
      G4DataVector* orig_reg_energies = new G4DataVector;
      G4DataVector* orig_reg_data = new G4DataVector;
 
      do
    {
      file >> a;
 
      // The file is organized into four columns:
      // 1st column contains the values of energy
      // 2nd column contains the corresponding data value
      // The file terminates with the pattern: -1   -1
      //                                       -2   -2
          //
      if (a != -1 && a != -2)
        {
          if (k%nColumns == 0)
                {
         orig_reg_energies->push_back(a*unit1);
                }
          else if (k%nColumns == 1)
                {
         orig_reg_data->push_back(a*unit2);
                }
              k++;
        }
    } 
      while (a != -2); // End of File
      
      file.close();
      G4VDataSetAlgorithm* algo = interpolation->Clone();
 
      G4VEMDataSet* dataSet = new G4EMDataSet(Z,orig_reg_energies,orig_reg_data,algo);
 
      dataMap[Z] = dataSet;
 
    }
}
 
void G4VCrossSectionHandler::LoadShellData(const G4String& fileName)
{
  size_t nZ = activeZ.size();
  for (size_t i=0; i<nZ; i++)
    {
      G4int Z = (G4int) activeZ[i];
      
      G4VDataSetAlgorithm* algo = interpolation->Clone();
      G4VEMDataSet* dataSet = new G4ShellEMDataSet(Z, algo);
 
      dataSet->LoadData(fileName);
      
      dataMap[Z] = dataSet;
    }
}
 
 
 
 
void G4VCrossSectionHandler::Clear()
{
  // Reset the map of data sets: remove the data sets from the map 
  std::map<G4int,G4VEMDataSet*,std::less<G4int> >::iterator pos;
 
  if(! dataMap.empty())
    {
        for (pos = dataMap.begin(); pos != dataMap.end(); ++pos)
    {
      // The following is a workaround for STL ObjectSpace implementation, 
      // which does not support the standard and does not accept
      // the syntax pos->first or pos->second
      // G4VEMDataSet* dataSet = pos->second;
      G4VEMDataSet* dataSet = (*pos).second;
      delete dataSet;
      dataSet = 0;
      G4int i = (*pos).first;
      dataMap[i] = 0;
    }
    dataMap.clear();
    }
 
  activeZ.clear();
  ActiveElements();
}
 
G4double G4VCrossSectionHandler::FindValue(G4int Z, G4double energy) const
{
  G4double value = 0.;
  
  std::map<G4int,G4VEMDataSet*,std::less<G4int> >::const_iterator pos;
  pos = dataMap.find(Z);
  if (pos!= dataMap.end())
    {
      // The following is a workaround for STL ObjectSpace implementation, 
      // which does not support the standard and does not accept 
      // the syntax pos->first or pos->second
      // G4VEMDataSet* dataSet = pos->second;
      G4VEMDataSet* dataSet = (*pos).second;
      value = dataSet->FindValue(energy);
    }
  else
    {
      G4cout << "WARNING: G4VCrossSectionHandler::FindValue did not find Z = "
         << Z << G4endl;
    }
  return value;
}
 
G4double G4VCrossSectionHandler::FindValue(G4int Z, G4double energy, 
                                           G4int shellIndex) const
{
  G4double value = 0.;
 
  std::map<G4int,G4VEMDataSet*,std::less<G4int> >::const_iterator pos;
  pos = dataMap.find(Z);
  if (pos!= dataMap.end())
    {
      // The following is a workaround for STL ObjectSpace implementation, 
      // which does not support the standard and does not accept 
      // the syntax pos->first or pos->second
      // G4VEMDataSet* dataSet = pos->second;
      G4VEMDataSet* dataSet = (*pos).second;
      if (shellIndex >= 0) 
    {
      G4int nComponents = dataSet->NumberOfComponents();
      if(shellIndex < nComponents)    
        // - MGP - Why doesn't it use G4VEMDataSet::FindValue directly?
        value = dataSet->GetComponent(shellIndex)->FindValue(energy);
      else 
        {
          G4cout << "WARNING: G4VCrossSectionHandler::FindValue did not find"
             << " shellIndex= " << shellIndex
             << " for  Z= "
             << Z << G4endl;
        }
    } else {
      value = dataSet->FindValue(energy);
    }
    }
  else
    {
      G4cout << "WARNING: G4VCrossSectionHandler::FindValue did not find Z = "
         << Z << G4endl;
    }
  return value;
}
 
 
G4double G4VCrossSectionHandler::ValueForMaterial(const G4Material* material,
                          G4double energy) const
{
  G4double value = 0.;
 
  const G4ElementVector* elementVector = material->GetElementVector();
  const G4double* nAtomsPerVolume = material->GetVecNbOfAtomsPerVolume();
  G4int nElements = material->GetNumberOfElements();
 
  for (G4int i=0 ; i<nElements ; i++)
    {
      G4int Z = (G4int) (*elementVector)[i]->GetZ();
      G4double elementValue = FindValue(Z,energy);
      G4double nAtomsVol = nAtomsPerVolume[i];
      value += nAtomsVol * elementValue;
    }
 
  return value;
}
 
 
G4VEMDataSet* G4VCrossSectionHandler::BuildMeanFreePathForMaterials(const G4DataVector* energyCuts)
{
  // Builds a CompositeDataSet containing the mean free path for each material
  // in the material table
 
  G4DataVector energyVector;
  G4double dBin = std::log10(eMax/eMin) / nBins;
 
  for (G4int i=0; i<nBins+1; i++)
    {
      energyVector.push_back(std::pow(10., std::log10(eMin)+i*dBin));
    }
 
  // Factory method to build cross sections in derived classes,
  // related to the type of physics process
 
  if (crossSections != 0)
    {  // Reset the list of cross sections
      std::vector<G4VEMDataSet*>::iterator mat;
      if (! crossSections->empty())
    {
      for (mat = crossSections->begin(); mat!= crossSections->end(); ++mat)
        {
          G4VEMDataSet* set = *mat;
          delete set;
          set = 0;
        }
      crossSections->clear();
      delete crossSections;
      crossSections = 0;
    }
    }
 
  crossSections = BuildCrossSectionsForMaterials(energyVector,energyCuts);
 
  if (crossSections == 0)
    {
      G4Exception("G4VCrossSectionHandler::BuildMeanFreePathForMaterials",
            "em1010",FatalException,"crossSections = 0");
      return 0;
    }
 
  G4VDataSetAlgorithm* algo = CreateInterpolation();
  G4VEMDataSet* materialSet = new G4CompositeEMDataSet(algo);
  //G4cout << "G4VCrossSectionHandler  new dataset " << materialSet << G4endl; 
 
  G4DataVector* energies;
  G4DataVector* data;
  G4DataVector* log_energies;
  G4DataVector* log_data;
 
  
  const G4ProductionCutsTable* theCoupleTable=
        G4ProductionCutsTable::GetProductionCutsTable();
  size_t numOfCouples = theCoupleTable->GetTableSize();
 
 
  for (size_t mLocal=0; mLocal<numOfCouples; mLocal++)
    {
      energies = new G4DataVector;
      data = new G4DataVector;
      log_energies = new G4DataVector;
      log_data = new G4DataVector;
      for (G4int bin=0; bin<nBins; bin++)
    {
      G4double energy = energyVector[bin];
      energies->push_back(energy);
          log_energies->push_back(std::log10(energy));
      G4VEMDataSet* matCrossSet = (*crossSections)[mLocal];
      G4double materialCrossSection = 0.0;
          G4int nElm = matCrossSet->NumberOfComponents();
          for(G4int j=0; j<nElm; j++) {
            materialCrossSection += matCrossSet->GetComponent(j)->FindValue(energy);
      }
 
      if (materialCrossSection > 0.)
        {
          data->push_back(1./materialCrossSection);
              log_data->push_back(std::log10(1./materialCrossSection));
        }
      else
        {
          data->push_back(DBL_MAX);
              log_data->push_back(std::log10(DBL_MAX));
        }
    }
      G4VDataSetAlgorithm* algoLocal = CreateInterpolation();
 
      //G4VEMDataSet* dataSet = new G4EMDataSet(m,energies,data,algo,1.,1.);
 
      G4VEMDataSet* dataSet = new G4EMDataSet(mLocal,energies,data,log_energies,log_data,algoLocal,1.,1.);
 
      materialSet->AddComponent(dataSet);
    }
 
  return materialSet;
}
 
 
G4int G4VCrossSectionHandler::SelectRandomAtom(const G4MaterialCutsCouple* couple,
                                                     G4double e) const
{
  // Select randomly an element within the material, according to the weight
  // determined by the cross sections in the data set
 
  const G4Material* material = couple->GetMaterial();
  G4int nElements = material->GetNumberOfElements();
 
  // Special case: the material consists of one element
  if (nElements == 1)
    {
      G4int Z = (G4int) material->GetZ();
      return Z;
    }
 
  // Composite material
 
  const G4ElementVector* elementVector = material->GetElementVector();
  size_t materialIndex = couple->GetIndex();
 
  G4VEMDataSet* materialSet = (*crossSections)[materialIndex];
  G4double materialCrossSection0 = 0.0;
  G4DataVector cross;
  cross.clear();
  for ( G4int i=0; i < nElements; i++ )
    {
      G4double cr = materialSet->GetComponent(i)->FindValue(e);
      materialCrossSection0 += cr;
      cross.push_back(materialCrossSection0);
    }
 
  G4double random = G4UniformRand() * materialCrossSection0;
 
  for (G4int k=0 ; k < nElements ; k++ )
    {
      if (random <= cross[k]) return (G4int) (*elementVector)[k]->GetZ();
    }
  // It should never get here
  return 0;
}
 
const G4Element* G4VCrossSectionHandler::SelectRandomElement(const G4MaterialCutsCouple* couple,
                                 G4double e) const
{
  // Select randomly an element within the material, according to the weight determined
  // by the cross sections in the data set
 
  const G4Material* material = couple->GetMaterial();
  G4Element* nullElement = 0;
  G4int nElements = material->GetNumberOfElements();
  const G4ElementVector* elementVector = material->GetElementVector();
 
  // Special case: the material consists of one element
  if (nElements == 1)
    {
      G4Element* element = (*elementVector)[0];
      return element;
    }
  else
    {
      // Composite material
 
      size_t materialIndex = couple->GetIndex();
 
      G4VEMDataSet* materialSet = (*crossSections)[materialIndex];
      G4double materialCrossSection0 = 0.0;
      G4DataVector cross;
      cross.clear();
      for (G4int i=0; i<nElements; i++)
        {
          G4double cr = materialSet->GetComponent(i)->FindValue(e);
          materialCrossSection0 += cr;
          cross.push_back(materialCrossSection0);
        }
 
      G4double random = G4UniformRand() * materialCrossSection0;
 
      for (G4int k=0 ; k < nElements ; k++ )
        {
          if (random <= cross[k]) return (*elementVector)[k];
        }
      // It should never end up here
      G4cout << "G4VCrossSectionHandler::SelectRandomElement - no element found" << G4endl;
      return nullElement;
    }
}
 
G4int G4VCrossSectionHandler::SelectRandomShell(G4int Z, G4double e) const
{
  // Select randomly a shell, according to the weight determined by the cross sections
  // in the data set
 
  // Note for later improvement: it would be useful to add a cache mechanism for already
  // used shells to improve performance
 
  G4int shell = 0;
 
  G4double totCrossSection = FindValue(Z,e);
  G4double random = G4UniformRand() * totCrossSection;
  G4double partialSum = 0.;
 
  G4VEMDataSet* dataSet = 0;
  std::map<G4int,G4VEMDataSet*,std::less<G4int> >::const_iterator pos;
  pos = dataMap.find(Z);
  // The following is a workaround for STL ObjectSpace implementation,
  // which does not support the standard and does not accept
  // the syntax pos->first or pos->second
  // if (pos != dataMap.end()) dataSet = pos->second;
  if (pos != dataMap.end()) 
    dataSet = (*pos).second;
  else
    {
      G4Exception("G4VCrossSectionHandler::SelectRandomShell",
            "em1011",FatalException,"unable to load the dataSet");
      return 0;
    }
 
  size_t nShells = dataSet->NumberOfComponents();
  for (size_t i=0; i<nShells; i++)
    {
      const G4VEMDataSet* shellDataSet = dataSet->GetComponent(i);
      if (shellDataSet != 0)
    {
      G4double value = shellDataSet->FindValue(e);
      partialSum += value;
      if (random <= partialSum) return i;
    }
    }
  // It should never get here
  return shell;
}
 
void G4VCrossSectionHandler::ActiveElements()
{
  const G4MaterialTable* materialTable = G4Material::GetMaterialTable();
  if (materialTable == 0)
      G4Exception("G4VCrossSectionHandler::ActiveElements",
            "em1001",FatalException,"no MaterialTable found");
 
  G4int nMaterials = G4Material::GetNumberOfMaterials();
 
  for (G4int mLocal2=0; mLocal2<nMaterials; mLocal2++)
    {
      const G4Material* material= (*materialTable)[mLocal2];
      const G4ElementVector* elementVector = material->GetElementVector();
      const G4int nElements = material->GetNumberOfElements();
 
      for (G4int iEl=0; iEl<nElements; iEl++)
    {
      G4Element* element = (*elementVector)[iEl];
      G4double Z = element->GetZ();
      if (!(activeZ.contains(Z)) && Z >= zMin && Z <= zMax)
        {
          activeZ.push_back(Z);
        }
    }
    }
}
 
G4VDataSetAlgorithm* G4VCrossSectionHandler::CreateInterpolation()
{
  G4VDataSetAlgorithm* algorithm = new G4LogLogInterpolation;
  return algorithm;
}
 
G4int G4VCrossSectionHandler::NumberOfComponents(G4int Z) const
{
  G4int n = 0;
 
  std::map<G4int,G4VEMDataSet*,std::less<G4int> >::const_iterator pos;
  pos = dataMap.find(Z);
  if (pos!= dataMap.end())
    {
      G4VEMDataSet* dataSet = (*pos).second;
      n = dataSet->NumberOfComponents();
    }
  else
    {
      G4cout << "WARNING: G4VCrossSectionHandler::NumberOfComponents did not "
             << "find Z = "
             << Z << G4endl;
    }
  return n;
}